Show Mvr Members - Cisco Catalyst 4500 Series Configuration Manual

show mvr members

show mvr members
To display all receiver and source ports that are currently members of an IP multicast group, use the show
mvr members privileged EXEC command.
Syntax Description ip-address
Command Default
Displays all the static and dynamic MVR members on the switch
Command Modes
Privileged EXEC
Command History Release
Release IOS XE 3.5.0E
and IOS 15.2(1)E
Usage Guidelines The show mvr members command applies to receiver and source ports. For MVR compatible mode, all
source ports are members of all multicast groups.
Examples This is an example of output from the show mvr members command:
Switch# show mvr members
MVR Group
------------
239.1.1.1
239.1.1.1
239.1.1.1
239.1.1.1
239.1.1.2
239.1.1.2
<output truncated>
239.255.0.255
239.255.1.0
This is an example of output from the show mvr members ip-address command. It shows how to view
the members of the IP multicast group 239.255.0.2.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-904
show mvr members [ip-address]
(Optional) Specifies the IP multicast address.
If the address is entered, all receiver and source ports that are members of the
multicast group are displayed.
If no address is entered, all members of all Multicast VLAN Registration
(MVR) groups are listed.
If a group has no members, the group is listed as Inactive.
Modification
This command was introduced on the Catalyst 4500 series switch.
Status Members
------ -------
ACTIVE Fa0/1
ACTIVE Fa0/1
ACTIVE Fa0/2
ACTIVE Fa0/2
ACTIVE Fa0/1
ACTIVE Fa0/2
INACTIVE
INACTIVE
VLAN Membership
---- ----------
1 Static
2000 Static
2 Static
3000 Static
1 Static
2 Static
None
None
Chapter 2
OL-30934-01