Show Idprom - Cisco Catalyst 4500 Series Configuration Manual

show idprom

show idprom
To display the IDPROMs for the chassis, supervisor engine, module, power supplies, fan trays, clock
module, and multiplexer (mux) buffer, use the show idprom command.
Syntax Description all
chassis
module
mod
interface int_name
supervisor
power-supply number
fan-tray
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
12.1(13)EW
12.2(18)EW
12.2(25)EW
Usage Guidelines When you enter the show idprom interface command, the output lines for Calibration type and Rx
(receive) power measurement may not be displayed for all GBICs.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-734
show idprom {all | chassis | module [mod] | interface int_name | supervisor | power-supply
number | fan-tray}
Displays information for all IDPROMs.
Displays information for the chassis IDPROMs.
Displays information for the module IDPROMs.
(Optional) Specifies the module name.
Displays information for the GBIC or SFP IDPROMs.
Displays information for the supervisor engine IDPROMs.
Displays information for the power supply IDPROMs.
Displays information for the fan tray IDPROMs.
Modification
This command was introduced on the Catalyst 4500 series switch.
Support for the power-supply, fan-tray, clock-module, and mux-buffer keywords
was added.
Support for interface keyword was added.
Enhanced the show idprom interface output to include the hexadecimal display of
the GBIC/SFP SEEPROM contents.
Support for the 10-Gigabit Ethernet interface was introduced on the Catalyst 4500
series switch.
Chapter 2
OL-30934-01