Clear Lacp Counters - Cisco Catalyst 4500 Series Configuration Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

clear lacp counters

To clear the statistics for all the interfaces belonging to a specific channel group, use the clear lacp
counters command.
Syntax Description channel-group
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(13)EW
Usage Guidelines
If you do not specify a channel group, all channel groups are cleared.
If you enter this command for a channel group that contains members in PAgP mode, the command is
ignored.
Examples The following example shows how to clear the statistics for a specific group:
Switch# clear lacp 1 counters
Switch#
Related Commands Command
show lacp
clear lacp [channel-group] counters
(Optional) Channel-group number; valid values are from 1 to 64.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Displays LACP information.
clear lacp counters
2-121