Cisco Catalyst 4500 Series Configuration Manual page 723

Chapter 2
The following example displays the policies applied on interface e0/0:
AUTH# show authentication sessions interface e0/0 policy
Local Policies:
Server Policies:
Resultant policies:
Method status list:
Related Commands Command
authentication
control-direction
authentication critical
recovery delay
authentication event
authentication fallback
authentication host-mode
Interface: Ethernet0/0
MAC Address: aabb.cc01.ff00
IPv6 Address: Unknown
IPv4 Address: Unknown
User-Name: gupn
Status: Authorized
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-host
Oper control dir: both
Session timeout: N/A
Common Session ID: 0D0102330000000D0003329A
Acct Session ID: Unknown
Handle: 0x6F000002
Current Policy: POLICY_Et0/0
Template: SVC_1 (priority 10)
Idle timeout: 500 sec
TAG: blue
URL Redirect: www.a.com
URL Redirect ACL: a
Template: SVC_3 (priority 20)
Idle timeout: 300 sec
TAG: red
URL_Redirect: www.b.com
URL-Redirect ACL: b
Idle timeout: 800 sec
Idle timeout: 500 sec
TAG: blue
URL Redirect: www.a.com
URL Redirect ACL: a
TAG: red
Method State
dot1x Authc Success
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Changes the port control to unidirectional or bidirectional.
Configures the 802.1X critical authentication parameters.
Configures the actions for authentication events.
Enables the Webauth fallback and specifies the fallback profile to
use when failing over to Webauth.
Defines the classification of a session that will be used to apply
the access-policies using the host-mode configuration.
show authentication
2-675