Show Vtp - Cisco Catalyst 4500 Series Configuration Manual

Chapter 2

show vtp

To display VTP statistics and domain information, use the show vtp command.
Syntax Description
counters
status
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples The following example shows how to display the VTP statistics:
Switch# show vtp counters
VTP statistics:
Summary advertisements received
Subset advertisements received
Request advertisements received
Summary advertisements transmitted : 31
Subset advertisements transmitted
Request advertisements transmitted : 0
Number of config revision errors
Number of config digest errors
Number of V1 summary errors
VTP pruning statistics:
Trunk
---------------- ---------------- ---------------- ---------------------------
Fa5/9
Switch#
The following example shows how to display the VTP domain status:
Switch# show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 1005
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
show vtp {counters | status}
Specifies the VTP statistics.
Specifies the VTP domain status.
Modification
This command was introduced on the Catalyst 4500 series switch.
Join Transmitted Join Received
1555
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
: 1
: 1
: 0
: 1
: 0
: 0
: 0
Summary advts received from
non-pruning-capable device
1564 0
: 2
: 250
: 33
: Server
: Lab_Network
: Enabled
: Enabled
: Disabled
show vtp
2-1011