Cisco Catalyst 4500 Series Configuration Manual page 873

Chapter 2
show issu clients
To display the ISSU clients, use the show issu clients command.
Syntax Description
peer_uid
Command Default
Displays a list of clients registered to the ISSU infrastructure at the supervisor engine where the
command is entered.
Command Modes
User EXEC mode
Command History Release
12.2(31)SGA
Usage Guidelines
To implement ISSU versioning functionality, a client must first register itself, client capability, and client
message information with the ISSU infrastructure during the system initialization.
Examples
The following example shows how to display the ISSU clients:
Switch# show issu clients
Client_ID = 2,
Client_ID = 3,
Client_ID = 4,
Client_ID = 5,
Client_ID = 7,
Client_ID = 8,
Client_ID = 9,
Client_ID = 10,
Client_ID = 11,
Client_ID = 100,
Client_ID = 110,
Client_ID = 200,
Client_ID = 2002,
Client_ID = 2003,
Client_ID = 2004,
Client_ID = 2010,
Client_ID = 2012,
Client_ID = 2021,
Client_ID = 2022,
Client_ID = 2023,
Client_ID = 2024,
Client_ID = 2025,
Client_ID = 2026,
Client_ID = 2027,
Client_ID = 2028,
show issu clients [peer_uid]
(Optional) Displays a list of clients registered to ISSU infrastructure at the
peer supervisor engine.
Modification
This command was introduced on the Catalyst 4500 series switch.
Client_Name = ISSU Proto client,
Client_Name = ISSU RF,
Client_Name = ISSU CF client,
Client_Name = ISSU Network RF client,
Client_Name = ISSU CONFIG SYNC,
Client_Name = ISSU ifIndex sync,
Client_Name = ISSU IPC client,
Client_Name = ISSU IPC Server client,
Client_Name = ISSU Red Mode Client,
Client_Name = ISSU rfs client,
Client_Name = ISSU ifs client,
Client_Name = ISSU Event Manager client,
Client_Name = CEF Push ISSU client,
Client_Name = ISSU XDR client,
Client_Name = ISSU SNMP client,
Client_Name = ARP HA,
Client_Name = ISSU HSRP Client,
Client_Name = XDR Int Priority ISSU client,
Client_Name = XDR Proc Priority ISSU client,
Client_Name = FIB HWIDB ISSU client,
Client_Name = FIB IDB ISSU client,
Client_Name = FIB HW subblock ISSU client,
Client_Name = FIB SW subblock ISSU client,
Client_Name = Adjacency ISSU client,
Client_Name = FIB IPV4 ISSU client,
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
show issu clients
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
Entity_Count = 1
2-825