Clear Errdisable Interface - Cisco Catalyst 4500 Series Configuration Manual

Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches

clear errdisable interface

Use the clear errdisable interface privileged EXEC command on an interface to re-enable a VLAN that
was error disabled.
clear errdisable interface interface-id vlan [vlan-list]
Syntax Description
interface-id
vlan-list
Command Default
This command has no default settings.
Command Modes
Privileged EXEC
Command History
Release
12.2(52)SG
Usage Guidelines
If a VLAN range is not specified, all VLANs on the specified interface are re-enabled. The clear
errdisable command recovers the disabled VLANs on an interface.
Clearing the error-disabled state from a virtual port does not change the link state of the physical port,
and it does not affect other VLAN ports on the physical port. It does post an event to STP, and spanning
tree goes through its normal process of bringing that VLAN port to the appropriate blocking or
forwarding state.
You can re-enable a port by using the shutdown and no shutdown interface configuration commands,
or you can clear error disable for VLANs by using the clear errdisable interface command.
Examples
The following example shows how to re-enable all VLANs that were error-disabled on Gigabit Ethernet
port 4/0/2.
Switch#
The following example shows how to re-enable a range of disabled VLANs on an interaface:
Switch# clear errdisable interface ethernet2 vlan 10-15
Switch#
Related Commands
Command
errdisable detect cause
errdisable recovery
Specifies interface and port.
(Optional) Specifies a list of VLANs to be re-enabled.
If not specified, then all VLANs are re-enabled.
Modification
Added support for per-VLAN error-disable detection.
clear errdisable interface gigabitethernet4/0/2 vlan
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Enables error-disabled detection for a specific cause or all
causes.
Configures the recovery mechanism variables.
clear errdisable interface
2-103

Advertisement

Table of Contents
loading

Table of Contents