Cisco Catalyst 4500 Series Configuration Manual page 243

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
device-sensor filter-list
To create a CDP or Link Layer Discovery Protocol (LLPD) filter list that contains a list of
Type-Length-Value (TLV) fields to be included or excluded in the Device Sensor output, use the
device-sensor filter-list command in global configuration mode. To remove the filter list, use the no
form of this command.
Syntax Description list
list-name
Command Default Protocol TLV fields filter list is not available.
Command Modes Global configuration
Command History Release
IOS XE 3.4.0SG and
IOS 15.1(2)SG)
Usage Guidelines
Use the device-sensor filter-list command to configure the name of the protocol filter list and enter into
discovery protocol sensor configuration mode. You can configure the list of TLVs in discovery protocol
sensor configuration mode using the tlv {name tlv-name | number tlv-number} command. Use the name
tlv-name keyword-argument pair to specify the name of the TLV. Enter ? to query the available TLV
names or refer to the following tables.
Table 2-1
CDP TLV Name
Global configuration mode
app
forward
location
Interface configuration mode
app
location
server-location
device-sensor filter-list cdp | lldp list list-name
no device-sensor filter-list cdp | lldp list list-name
Contains a discovery protocol filter list.
Name of the filter list.
Modification
Command introduced on the Catalyst 4500 Series switch.
CDP TLV Names
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Enable application TLV
Forward CDP packets to another interface
Enable location information
Enable application TLV
Enable location information
Enable CDP location server on interface
device-sensor filter-list
2-205