Cisco Catalyst 4500 Series Configuration Manual page 682

reset
reset
To leave the proposed new VLAN database but remain in VLAN configuration mode and reset the
proposed new database to be identical to the VLAN database currently implemented, use the reset
command.
Syntax Description This command has no arguments or keywords.
Command Default This command has no default settings.
Command Modes
VLAN configuration mode
Command History Release
12.1(8a)EW
Examples
The following example shows how to reset the proposed new VLAN database to the current VLAN
database:
Switch(vlan-config)# reset
RESET completed.
Switch(vlan-config)#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-642
reset
Modification
This command was introduced on the Catalyst 4500 series switch.
Chapter 2