Debug Nvram - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
debug nvram
To debug the NVRAM activity, use the debug nvram command. To disable the debugging output, use
the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
Examples
The following example shows how to debug NVRAM:
Switch# debug nvram
NVRAM behavior debugging is on
Switch#
Related Commands
Command
undebug nvram (same as no debug
nvram)
debug nvram
no debug nvram
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Disables debugging output.
debug nvram
2-169
Advertisement
Table of Contents
