Show Interfaces Description - Cisco Catalyst 4500 Series Configuration Manual

show interfaces description

show interfaces description
To display a description and status of an interface, use the show interfaces description command.
Syntax Description
interface
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
Examples The following example shows how to display information for all interfaces:
Switch# show interfaces description
Interface Status
PO0/0
PO0/1
Gi1/1
Switch#
Related Commands Command
description (refer to Cisco IOS
documentation)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-750
show interfaces [interface] description
(Optional) Type of interface.
Modification
This command was introduced on the Catalyst 4500 series switch.
Protocol Description
admin down down
admin down down
up up
First interface
GigE to server farm
Description
Includes a specific description about the digital signal
processor (DSP) interface.
Chapter 2
OL-30934-01