Cisco Catalyst 4500 Series Configuration Manual page 783

Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
Examples
The following example shows how to display IDPROM information for module 4:
Switch# show idprom module 4
Module 4 Idprom:
Common Block Signature = 0xABAB
Common Block Version = 1
Common Block Length = 144
Common Block Checksum = 4199
Idprom Size = 256
Block Count = 2
FRU Major Type = 0x4201
FRU Minor Type = 303
OEM String = Cisco Systems, Inc.
Product Number = WS-X4306
Serial Number = 00000135
Part Number = <tbd>
Hardware Revision = 0.2
Manufacturing Bits = 0x0000
Engineering Bits = 0x0000
Snmp OID = 0.0.0.0.0.0.0.0
Power Consumption = 0
RMA Failure Code = 0 0 0 0
Linecard Block Signature = 0x4201
Linecard Block Version = 1
Linecard Block Length = 24
Linecard Block Checksum = 658
Feature Bits = 0x0000000000000000
Card Feature Index = 50
MAC Base = 0010.7bab.9830
MAC Count = 6
Switch#
The following example shows how to display IDPROM information for the GBICs on the Gigabit
Ethernet interface 1/2:
Switch# show idprom interface gigabitethernet1/2
GBIC Serial EEPROM Contents:
Common Block:
Identifier
Extended Id
Connector
Transceiver
Speed
Media
Technology
Link Length
GE Comp Codes
SONET Comp Codes = Not available [0x0]
Encoding
BR, Nominal
Length(9u) in km
Length(9u)
Length(50u)
Length(62.5u)
Length(Copper)
Vendor name
Vendor OUI
Vendor Part No.
Vendor Part Rev.
Wavelength
= GBIC [0x1]
= Not specified/compliant with defined MOD_DEF [0x0]
= SC connector [0x1]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= Not available [0x0]
= 8B10B
[0x1]
= 1300000000 MHz
= GBIC does not support single mode fibre, or the length
must be determined from the transceiver technology.
= > 25.4 km
= GBIC does not support 50 micron multi-mode fibre, or the
length must be determined from the transceiver technology.
= GBIC does not support 62.5 micron multi-mode fibre, or
the length must be determined from transceiver technology.
= GBIC does not support copper cables, or the length must
be determined from the transceiver technology.
= CISCO-FINISAR
= 36965
= FTR-0119-CSC
= B
= Not available
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
show idprom
2-735

Advertisement

Table of Contents
loading

Table of Contents