Show Ip Igmp Profile - Cisco Catalyst 4500 Series Configuration Manual

show ip igmp profile

show ip igmp profile
To view all configured IGMP profiles or a specified IGMP profile, use the show ip igmp profile
privileged EXEC command.
Syntax Description profile number
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.1(11b)EW
Usage Guidelines
If no profile number is entered, all IGMP profiles are displayed.
Examples
The following example shows how to display IGMP profile 40:
Switch# show ip igmp profile 40
IGMP Profile 40
Switch#
The following example shows how to display all IGMP profiles:
Switch# show ip igmp profile
IGMP Profile 3
IGMP Profile 4
Switch#
Related Commands Command
ip igmp profile
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-780
show ip igmp profile [profile number]
(Optional) IGMP profile number to be displayed; valid ranges are from
1 to 4294967295.
Modification
This command was introduced on the Catalyst 4500 series switch.
permit
range 233.1.1.1 233.255.255.255
range 230.9.9.0 230.9.9.0
permit
range 229.9.9.0 229.255.255.255
Description
Creates an IGMP profile.
Chapter 2
OL-30934-01