Cisco Catalyst 4500 Series Configuration Manual page 461

Chapter 2
license right-to-use deactivate
This command applies only to Catalyst 4500X, as well as Supervisor Engine 7-E, 7L-E, and 8-E.
Note
To deactivate the PRTU license use the license right-to-use deactivate command.
Syntax Description
feature-name
Command Default PRTU licenses are inactive
Command Modes privileged EXEC mode
Command History Release
IOS XE 3.4.2SG
Usage Guidelines Use this command to deactivate the PRTU licenses that are active.
The PRTU licenses can be deactivated provided any other valid license is available for the same feature.
For example, to deactivate a entservices PRTU license, the switch should contain a valid evaluation
license. Else, the deactivation will fail.
Examples The following example shows how to deactivate PRTU licenses:
Switch# license right-to-use deactivate entservices
Related Commands Command
license right-to-use
activate
license right-to-use deactivate feature-name
Specifies the feature name (e.g., entservices, ipbase, lanbase)
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Activates the PRTU license
license right-to-use deactivate
2-421