Cisco Catalyst 4500 Series Configuration Manual page 510

macro auto monitor
macro auto monitor
To enable the device classifier, use the macro auto monitor global configuration command. Use the no
form of this command to disable the device classifier.
Syntax Description
This command has no arguments or keywords.
Command Default Device classifier is enabled.
Command Modes Global configuration
Command History Release
Release IOS XE 3.3.0
SG (15.1(1)SG)
Usage Guidelines
Use the no macro auto monitor global configuration command to disable the device classifier. You
cannot disable the device classifier while it is being used by features such as ASP.
Examples
The following example shows how to enable the ASP device classifier on a switch:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# macro auto monitor
Switch(config)# end
Related Commands Command
show macro auto monitor clients
show macro auto monitor device
show macro auto monitor type
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-470
macro auto monitor
no macro auto monitor
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Displays the clients using the device classifier facility on the
switch.
Displays the devices connected to a switch, along with their
properties and classifications.
Displays all the device types known to the device classification
agent.
Chapter 2