Cisco Catalyst 4500 Series Configuration Manual page 456

l2protocol-tunnel shutdown-threshold
Related Commands Command
l2protocol-tunnel
l2protocol-tunnel cos
l2protocol-tunnel drop-threshold
lacp port-channel min-links
To define the minimum number of LACP ports that must be bundled in the link-up state and bundled in
the EtherChannel in order that a port channel becomes active, use the port-channel min-links command
in interface configuration mode. To return to the default setting, use the no form of this command.
Syntax Description min_links_number
Command Default
None.
Command Modes
Interface configuration mode
Command History Release
IOS XE 3.8.0E
and IOS
15.2(4)E
Usage Guidelines For switches in VSS mode, when configuring min-links, ensure that the port-channel has the same number of
links on the active switch and the standby switch.
Examples The following example shows how to specify a minimum of three active LACP ports before port channel
2 becomes active:
Switch(config(#) interface port-channel 2
Switch(config-if)# port-channel min-links 3
Related Commands Command
show lacp
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-416
port-channel min-links min_links_number
The minimum number of active LACP ports in the port channel. The range is 2 to
8. The default is 1.
Modification
This command was introduced.
Description
Enables protocol tunneling on an interface.
Configures the class of service (CoS) value for all tunneled
Layer 2 protocol packets.
Sets a drop threshold for the maximum rate of Layer 2
protocol packets per second to be received before an
interface drops packets.
Description
Displays LACP information.
Chapter 2