Cisco Catalyst 4500 Series Configuration Manual page 1028
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
show switch virtual (virtual switch)
Examples
The following example shows how to display configuration and status information for the VSS:
•
•
•
•
The following example shows how to display the virtual switch priority for local and peer switches:
Router# show switch virtual
Switch mode
Virtual switch domain number : 100
Local switch number
Local switch operational role: Virtual Switch Active
Peer switch number
Peer switch operational role : Virtual Switch Standby
Router#
The following example shows how to display the virtual switch link information:
Router# show switch virtual link
VSL Status
VSL Uptime
VSL SCP Ping
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-980
In virtual switch mode without skipping config-register:
Router# show switch virtual
Switch mode : Virtual Switch
Virtual switch domain number : 1
Local switch number : 2
Local switch operational role: Virtual Switch Active
Peer switch number : 1
Peer switch operational role : Virtual Switch Standby
Router#
In virtual switch mode with skipping config-register but not yet rebooted:
Router# show switch virtual
Switch mode : Virtual Switch
Virtual switch domain number : 1
Local switch number : 2
Local switch operational role: Virtual Switch Active
Peer switch number : 1
Peer switch operational role : Virtual Switch Standby
Warning: Config-register set or will be set to skip configuration 0x2142 in the next
reload.
Change config-register; otherwise, switch will be boot in Standalone mode with some
default config.
Router#
In standalone mode without skipping config-register:
Router# show switch virtual
Switch Mode : Standalone
Not in Virtual Switch mode due to:
Domain ID is not configured
Router#
In standalone mode with skipping config-register:
Router# show switch virtual
Switch Mode : Standalone
Not in Virtual Switch mode due to:
Domain ID is not configured
Warning: config-register is set to skip parse 0x2142 in RP or SP
Use [show boot] on RP/SP to verify.
Router#
: UP
: 4 hours, 26 minutes
: Pass (or Fail)
: Virtual Switch
: 1
: 2
OK (or Not OK)
Chapter 2
OL-30934-01
Advertisement
Table of Contents
