Cisco Catalyst 4500 Series Configuration Manual page 954

show netflow-lite exporter
show netflow-lite exporter
NetFlow-lite is only supported on the Catalyst 4948E and Catalyst 4948E-F Ethernet switches.
Note
To displays information about the collector and global stats, use the show netflow-lite exporter
command.
Syntax Description exporter-name
Command Default
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
15.0(2)SG
Usage Guidelines This command displays the total number of export packets sent.
Examples The following example shows how to display information about the collector and global stats:
Switch# show netflow-lite
Netflow-lite
Description:
Network Protocol Configuration:
Transport Protocol Configuration:
Export Protocol Configuration:
Exporter Statistics:
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-906
show netflow-lite exporter exporter-name
Specifies an exporter name.
Modification
Command introduced on the Catalyst 4500 series switch.
Exporter e1:
Destination IP address:
VRF label:
Source IP Address:
DSCP:
TTL:
COS:
Transport Protocol:
Destination Port:
Source Port:
Export Protocol:
Export packets sent:
exporter e1
Exporter
192.168.1.1
cisc
10.1.1.5
0x1
30
1
UDP
1234
65535
netflow-v9
36
Chapter 2
OL-30934-01