Cisco Catalyst 4500 Series Configuration Manual page 1027

Chapter 2
show switch virtual (virtual switch)
To display configuration and status information for a virtual switching system (VSS), use the show
switch virtual command in EXEC mode.
Syntax Description detail
detail-active
pagp
fast-hello
summary
link
counters
port-channel
ports
redundancy
role
slot-map
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History Release
12.2(52)SG
Release IOS XE 3.5.0E and
IOS 15.2(1)SG
Usage Guidelines
Use this command to display configuration and status information for a VSS.
The show switch virtual link detail command displays the output of the show switch virtual link
commands and the show vslp lmp internal commands. In the output, the entry "show int" is displayed
for all the VSL members.
The show switch virtual dual-active pagp command displays dual-active trust mode status.
show switch virtual [dual-active {pagp | fast-hello | summary} | link [counters | detail |
port-channel | ports] | redundancy | role | slot-map]
(Optional) Displays detailed virtual switch information.
(Optional) Displays virtual switch dual-active information.
Specifies a summary of dual-active PAgP information
Specifies a summary of dual-active fast-hello information,
Specifies a summary of dual-active configuration information,
(Optional) Displays the virtual switch link information.
(Optional) Displays VSL counter information
(Optional) Displays VSL port channel information.
(Optional) Displays VSL port information.
(Optional) Displays the VSS redundancy status.
(Optional) Displays the VSS role information.
(Optional) Displays the VSS slot map table.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Modification
This command was introduced on the Catalyst 4500 series switch.
This command was introduced.
show switch virtual (virtual switch)
2-979