Cisco Catalyst 4500 Series Configuration Manual page 237

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
destination message-size-limit bytes
To configure a maximum destination message size for the destination profile, use the destination
message-size-limit bytes command.
Syntax Description This command has no arguments or keywords.
Command Default
3145728 bytes
Command Modes
cfg-call-home-profile
Command History Release
12.2(52)SG
Usage Guidelines
To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
Examples
The following example shows how to configure the maximum message size for the destination profile as
3000000:
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# destination message-size-limit 3000000
Switch(cfg-call-home-profile)#
Related Commands Command
destination address
destination preferred-msg-format
destination transport-method
profile
subscribe-to-alert-group all
subscribe-to-alert-group configuration
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
destination message-size-limit bytes
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Configures the destination e-mail address or URL to which
Call Home messages will be sent.
Configures a preferred message format.
Enables the message transport method.
Enters profile call-home configuration submode
Subscribes to all available alert groups.
Subscribes this destination profile to the Configuration
alert group.
Subscribes this destination profile to the Diagnostic alert
group.
Subscribes this destination profile to the Environment alert
group.
destination message-size-limit bytes
2-199