Show Link State Group - Cisco Catalyst 4500 Series Configuration Manual

show link state group

show link state group
To display link state group information, use the show link state group command in user EXEC or
privileged EXEC mode.
Syntax Description detail
Command Default
None
Command Modes User EXEC (>)
Privileged EXEC (#)
Command History Release
15.1(1)S
Examples The following example displays the link-state group information:
Switch# enable
Switch# show link state group 1
Link State Group: 1 Status: Enabled, Down
Router> show link state group detail
(Up):Interface up (Dwn):Interface Down (Dis):Interface disabled
Link State Group: 1 Status: Enabled, Down
Upstream Interfaces : Gi3/5(Dwn) Gi3/6(Dwn)
Downstream Interfaces : Gi3/1(Dis) Gi3/2(Dis) Gi3/3(Dis) Gi3/4(Dis)
Link State Group: 2 Status: Enabled, Down
Upstream Interfaces : Gi3/15(Dwn) Gi3/16(Dwn) Gi3/17(Dwn)
Downstream Interfaces : Gi3/11(Dis) Gi3/12(Dis) Gi3/13(Dis) Gi3/14(Dis)
(Up):Interface up (Dwn):Interface Down (Dis):Interface disabled
Related Commands Command
link state track
link state group
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-854
show link state group detail
Displays detailed information about the group.
Modification
This command was introduced.
Description
Configures the link state group and enables link state tracking.
Configures the link state group and interface, as either an upstream or
downstream interface in the group.
Chapter 2
OL-30934-01