Cisco Catalyst 4500 Series Configuration Manual page 326

Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

hw-module uplink select
Table 2-7
Active Supervisor Uplink
Ports
A1
SFP+ —
SFP
SFP
Choose 1-Gigabit operation through the command line interface.
SFP
Examples
The following example shows how to select the Gigabit Ethernet uplinks:
Switch(config)# hw-module uplink select gigabitethernet
A reload of the active supervisor is required to apply the new configuration.
Switch(config)# exit
Switch#
Note
The Gigabit Ethernet uplinks will be active after the next reload.
The following example shows how to select the Gigabit Ethernet uplinks in a redundant system in SSO
mode:
Switch(config)# hw-module uplink select gigabitethernet
A 'redundancy reload shelf' or power-cycle of chassis is required to apply the new
configuration
Switch(config)# exit
Switch#
The Gigabit Ethernet uplinks will be active after the next reload of the chassis/shelf. Use the
Note
redundancy reload shelf command to reload the chassis/shelf.
The following example shows how to select the Gigabit Ethernet uplinks in a redundant system in RPR
mode:
Switch(config)# hw-module uplink select gigabitethernet
A reload of the active supervisor is required to apply the new configuration.
Switch(config)# exit
Switch#
The Gigabit Ethernet uplinks will be active on a switchover or reload of the active supervisor engine.
Note
The following example shows how to select all the uplinks in a redundant system in SSO mode:
Switch(config)# hw-module uplink select all
Warning: This configuration mode may disable slot10.
A 'redundancy reload shelf' or power-cycle of chassis is required to apply the new
configuration.
Switch(config)# exit
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-288
Uplink Options for Redundant Supervisor Mode
Standby Supervisor Uplink
Ports
A2
A3
A4
B1
SFP
SFP+ —
SFP
SFP
SFP
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Speeds Achievable with this
B2
B3
B4
Combination of Pluggables
11 Gbps
11 Gbps
2 Gbps
SFP
4 Gbps
OL-30934-01

Advertisement

Table of Contents
loading

Table of Contents