Head Replacement - Roland VersaCamm VS-640i Service Notes

3-1 HEAD REPLACEMENT

Turn off the Sub Power SW, and then turn off the Main Power
1
SW.
Be sure to turn off the main power when replacing
the head. The Head or Main Board could break, oth-
erwise. It is recommended to disconnect the power
cord.
Remove the Right Cover and the Right Top Cover.
2
Open the Front Cover and move the Tool Carriage with the
3
Head Carriage leftwards to the position where it is not above
the Capping Unit.
Then, disconnect the Tool Carriage from the Head Carriage.
Remove the Carriage Cover.
4
The positions of fi xing screws for the Carriage Cover are at
the left, right and top of the cover.
The Head Carriage Cover has six screws.
OFF
Right Cover
3-5
Right Top Cover
2
1
Carriage Cover