Moving Between Setting Levels; Moving To The Initial Setting Level - Omron E5AC-T User Manual

4-1

Moving between Setting Levels

The Operation Level is displayed first when the power supply to the Digital Controller is turned ON. To
display the parameters, you must move to the following setting levels.
• Operation Level (Entered when the power supply is turned ON.)
• Initial Setting Level
• Program Setting Level
• Adjustment Level
• PID Setting Level
• Protect Level
• Advanced Function Setting Level
• Communications Setting Level
The procedures to move between the setting levels starting from the Operation Level are provided
below.
4-1-1

Moving to the Initial Setting Level

Moving from the Operation Level to the Initial Setting Level
1
Press the O Key for at least 3 seconds in the Operation Level.
The No. 1 display will flash when the key is pressed for 1 s or
longer.
The display will change from the Operation Level to the Initial
Setting Level.
Moving from the Initial Setting Level to the Operation Level
1
Press the O Key for at least 1 second in the Initial Setting
Level.
The display will change from the Initial Setting Level to the
Operation Level.
E5@C-T Digital Temperature Controllers User's Manual (H185)
4 Basic Operation
Operation Level
25
0
Initial Setting Level
in-t
Input Type
5
Initial Setting Level
in-t
5
Operation Level
25
PV/SP
0
4 - 3
4