Omron E5AC-T User Manual page 100

Operating Flow for Rate of Rise Programming
Item
1
Initial Setting Level
Make
the
Set the Input Type parameter.
initial
settings
Set the PID ON/OFF parameter.
other
than
program
-related
settings.
2
Make
Initial Setting Level
the ini-
tial pro-
gram-rel
ated set-
tings.
Set the Startup Operation parameter.
Adjustment Level
E5@C-T Digital Temperature Controllers User's Manual (H185)
Operating flow
Power ON
Set the Alarm Type parameter.
Set the Program Time Unit parameter.
Set the Step Time/Rate of Rise Programming parameter.
Set the Time Unit of Ramp Rate parameter.
Set the Reset Operation parameter.
Set the Operation End Operation parameter.
Set the SP Mode parameter.
Settings
Turn ON the power supply and then press the O
Key for at least three seconds to move to the Initial
Setting Level.
Set the parameter to a K thermocouple
(default).
Set the parameter to PID control (default).
Set the parameter to an upper-limit alarm (default).
Set the parameter to hours and minutes (default).
Set the parameter to rate of rise programming.
(default).
Set the parameter to minutes (default).
Set the parameter to stop control (default).
Set the parameter to continue operation (default).
Set the parameter to reset status (default).
Set the parameter to the program SP (default).
4 Basic Operation
Page
4-3
4-18
4-21
4-56
4-33
4-34
4-35
4-35
4-36
4-38
4-38
4 - 15
4