Omron E5AC-T User Manual page 347

6 Parameters
alfa
• Normally, use the default for this parameter.
• This parameter sets the 2-PID control a constant.
Function
Setting
Related Parameters
See
See
PID ON/OFF (Initial Setting Level): Page 6-63
tidu
This parameter sets the time unit for the Integral Time, Integral Time (Cooling), Derivative
Time, and Derivative Time (Cooling) parameters.
Function
Setting
Note: The Integral/Derivative Time Unit parameter changes to 0.1 when the RT (robust tuning)
parameter is changed from OFF to ON.
Related Parameters
See
See
Integral Time and Derivative Time (Adjustment Level): Page 6-36
Derivative Time (Cooling) and Integral Time (Cooling) (Adjustment Level): Page 6-37
6 - 86
α
Setting range
0.00 to 1.00
Integral/Derivative Time Unit
Setting range
1 to 0.1
2-PID control must be set.
Default
0.65
Control must be set to 2-PID control.
Unit Default
Seconds 1
E5@C-T Digital Temperature Controllers User's Manual (H185)