Hiding Parameters; Parameter Mask Settings - Omron E5AC-T User Manual

5-7

Hiding Parameters

5-7-1

Parameter Mask Settings

You can use a key operation to hide parameters that do not need to be displayed. This allows you to
prevent incorrect settings for parameters or to simplify the parameter configuration according to the
application.
Parameters
Display
pmst
pmsk
Description
• If you set the Parameter Mask Setting parameter (Advanced Function Setting Level) to ON,
Parameter Mask Mode is entered.
• When you enter Parameter Mask Mode, the first parameter in the Operation Level is displayed.
• When you press the O Key, the setting level changes as shown below.
Operation
Level
* You cannot mask parameters in the Manual Control Level, Monitor/Setting Item Level, and Protect Level.
• Press the M Key once for less than one second to move to the next parameter in the current
setting level.
Press the M Key for at least one second to move to the previous parameter in the current setting
level.
• Press the U or D Key to set disp (disable mask (show)) or mask (enable mask (hide)).
• Perform one of the following operations to end Parameter Mask Mode.
1. Cycle the power supply.
2. Send a Software Reset command with communications.
3. Press O Key for at least one second.
• When you enter Parameter Mask Mode, the first parameter in the Operation Level is displayed.
However, you cannot set a parameter mask for the Process Value/Set Point 1 and Process
Value/Set Point 2 parameters.
E5@C-T Digital Temperature Controllers User's Manual (H185)
Parameter

Parameter Mask Settings

Parameter Mask Enable
Program
Adjustment
Setting Level
Level
Communications
Advanced Function
Setting Level
Setting Level
Application
Moves you to the Parameter Mask Mode.
Enables and disables parameter masks.
PID Setting
Level
Initial Setting
Level
5 Advanced Operations
Level
Advanced Function
Setting Level
Protect Level
5 - 21
5