Omron E5AC-T User Manual page 66

E5AC-T
Temperature unit
Operation indicators
Front-panel Setup Tool port
Press O Key once to go to
Program Setting Level.
Press the O Key for at least
3 seconds to go to the Initial
Setting Level.
Press the M Key to change to another
parameter.
Press M and D Keys simultaneously for at
least 1 second to change between run and
reset status.
Displays
Name
No. 1 display
No. 2 display
No. 3 Display
(E5EC-T/E5AC-T
only)
Temperature unit
E5@C-T Digital Temperature Controllers User's Manual (H185)
Front Panel
Displays the process value or a monitor/setting item.
Displays the set point or the value of a monitor/setting item.
Displays the program number, segment number, remaining segment time, or MV (valve
opening). (The value that is displayed is set in the PV/SP Display Selection parameter in
the Advanced Function Setting Level.)
Displays the temperature unit (C or F).
3 Part Names and Basic Procedures
No. 1 display
PV or specified monitor/setting item
No. 2 display
SP or specified monitor/setting value
No. 3 display
Program No., segment No.,
remaining segment time, or MV
(valve opening).
Press the U or D Key
to set the parameter.
Press U Key for at least 1 second
when SP and PV are displayed in
Program SP Mode to go to Display
Segment Selection parameter in
Program Setting Level.
Press the S Key to change the digit (default
setting).
Description
Top View of E5AC-T
Top-panel
Setup
Tool port
3 - 5
3