Omron E5AC-T User Manual page 31

1 Introduction
I/O Related to Programmed Models
Input
Run/Reset Switching
Press the M (Mode) and
D (Down) Key
simultaneously for at
least 1 second.
Setting Key Operations
• Run/Reset switching
• Segment jump
• Hold
• Wait band setting, Etc. Program No. 0
PF Key
• Run/Reset switching
• Hold/Clear hold
• Advance, Etc.
Event Inputs
• Run/Reset switching
• Hold/Clear hold
• Advance
• Program SP Mode/Fixed
SP Mode
• Program No. specification,
etc.
Program Start Point for Segment 0
One of the following depending on
the settings of the Operation at
Reset and Step Time/Rate of Rise
Programming parameters.
• Segment 0 set point
• Process value (PV)
• Fixed SP
Setting of startup operation
Continue pre-power-OFF status, reset, run, or Manual Mode
1 - 6
Program No. 7
SP
Program No. 1
SP
SP
Segment 2
Segment 1
Segment 0
Run
ON
OFF
Other functions
• Operation at start of program: PV start or SP start
• Program start time: Standby operation (delay) can be set.
• Segment operation: Advance segment, hold, wait to advance to next segment, or
key-operation-initiated segment jumps
• Program link operations: Repeating and linking programs
• SP tracking: Overwriting fixed SP with current SP when changing to Fixed SP Mode
• Shifting the program SP
Changing SP mode or
between run and reset status
Program SP Mode
Time
Segment 30
Segment 31
Time
Time signals or other
ON/OFF signals
Time
Setting of operation end operation
Continue final segment SP, fixed SP, or reset
E5@C-T Digital Temperature Controllers User's Manual (H185)
Output
Fixed SP Mode
SP
Fixed
SP
Time
Auxiliary output 1 or 2
Control output 1 or 2
• Time signal outputs
• Program end outputs
• RUN output
• Stage outputs can be assigned.