Omron E5AC-T User Manual page 97

4 Basic Operation
Operating Flow for Step Time Programming
Item
1
Make the
Initial Setting Level
initial
settings
other
than
program-
related
settings.
2
Make the
Initial Setting Level
initial
Set the Program Time Unit parameter.
pro-
gram-rel
Set the Step Time/Rate of Rise Programming parameter.
ated set-
tings.
Set the Reset Operation parameter.
Set the Startup Operation parameter.
Set the Operation End Operation parameter.
Adjustment Level
4 - 12
Operating flow
Power ON
Set the Input Type parameter.
Set the PID ON/OFF parameter.
Set the Alarm Type parameter.
Set the SP Mode parameter.
Settings
Turn ON the power supply and then press the O Key
for at least three seconds to move to the Initial Setting
Level.
Set the parameter to a K thermocouple (default).
Set the parameter to PID control (default).
Set the parameter to an upper-limit alarm (default).
Set the parameter to hours and minutes (default).
Set the parameter to step time programming (default). 4-34
Set the parameter to stop control (default).
Set the parameter to continue operation (default).
Set the parameter to reset status (default).
Set the parameter to the program SP (default).
E5@C-T Digital Temperature Controllers User's Manual (H185)
Page
4-3
4-18
4-21
4-56
4-33
4-35
4-36
4-38
4-38