Omron E5AC-T User Manual page 74

3 Part Names and Basic Procedures
Calibration Level
This level is used to calibrate the Digital Controller. You can move to the Calibration Level from the
Advanced Function Setting Level.
* You can use this level only when control is stopped.
Monitor/Setting Item Level
To use the S Key to display the Monitor/Setting Items, change the setting of the PF Setting
parameter to pfdp. The items that will be displayed in the Monitor/Setting Item Level are set using
the Monitor/Setting Item 1 to 5 parameters.
3
E5@C-T Digital Temperature Controllers User's Manual (H185) 3 - 13