Omron E5AC-T User Manual page 175

5 Advanced Operations
Input contact
OFF
ON
Switching between 40% AT Execute/Cancel for All PID Sets
When the Event Input Assignment parameter is set to ATA1 (All PID 40% AT Execute/Cancel), 40%
AT will be executed for all PID sets when the event input turns ON. AT will be cancelled when the
input turns OFF. This function is enabled only during Fixed SP Mode.
Input contact
OFF
ON
Switching Setting Change Enable/Disable
When the Event Input Assignment parameter is set to WTPT (Setting Change Enable/Disable), the
setting change will be disabled when the event input turns ON and will be enabled when the input
turns OFF.
Input contact
OFF
ON
Switching Communications Write Enable/Disable
When the Event Input Assignment parameter is set to CMWT (Setting Change Enable/Disable),
writing with communications will be enabled when the event input turns ON and writing with
communications will be disabled when the event input turns OFF.
Input contact
OFF
ON
Switching Alarm Latch Cancel
When the Event Input Assignment parameter is set to LAT (Alarm Latch Cancel), all alarm latches
(alarms 1 to 4, heater burnout alarm, HS alarm, latch) will be cancelled when event input turns ON.
Input contact
OFF
ON
Enabling and Disabling Wait Operation
When the Event Input Assignment parameter is set to WAIT (Wait Enable/Disable), wait operation is
enabled while the event input is ON. When the event input turns OFF, wait operation will be disabled.
This function is enabled only during program operation.
Input contact
OFF
ON
5 - 14
Status
AT canceled.
100% AT executed
for all PID sets.
Status
AT canceled.
40% AT executed
for all PID sets.
Status
Enabled
Disabled
Status
Disabled
Enabled
Status
---
Cancelled
Status
Wait operation
disabled.
Wait operation
enabled.
E5@C-T Digital Temperature Controllers User's Manual (H185)