Omron E5AC-T User Manual page 278

d.prg
• This parameter specifies the number of the program to be set.
Function
Setting
* Number of program currently used for control.
Related Sections
See
See
4-7 Setting Programs (page 4-27)
s-no
• This parameter specifies the number of segments in the program.
Function
Setting
Related Sections
See
See
4-7 Setting Programs (page 4-27)
d.seg
• This parameter specifies the number of the segment to set in the program.
Function
end or 0 to Number of segments used −1
Setting
* If you move from the PV/SP display by pressing the U Key for one second, the current
segment number is displayed.
Related Sections
See
See
4-7 Setting Programs (page 4-27)
E5@C-T Digital Temperature Controllers User's Manual (H185)
Display Program Selection
Setting range
0 to 7
Number of Segments Used
Setting range
1 to 32
Display Segment Selection
Setting range
Unit Default
--- *
Unit Default
--- 8
Unit Default
end*
---
6 Parameters
6
6 - 17