Omron E5AC-T User Manual page 266

wtpt
Changes to settings using key operations are restricted.
Change Setting Protect
This parameter is not displayed if the Event Input Assignment 1 to 6 parameters are set
Function
to enable/disable setting changes.
Setting
• The all protect indication (
pfpt
PF Key Protect
This parameter enables and disables PF Key operation.
Function
Setting
pmsk
• This parameter turns the parameter mask function ON and OFF.
Function
on: Enabled, off: Disabled
Setting
* Parameter masks can be used to hide the displays of parameters that are not needed. You can set parameter
masks with a key operation or with the Setup Tool.
Setup Tool: CX-Thermo (EST2-2C-MV4)
E5@C-T Digital Temperature Controllers User's Manual (H185)
Setting Change Protect
Set value
OFF (default) Settings can be changed using key operations.
ON Settings cannot be changed using key operations. (The protect level settings,
however, can be changed.)
PF Key Protect
Set value
OFF (default) PF Key enabled
ON PF Key disabled (Operation as a function key is prohibited.)
Parameter Mask Enable
Setting range
The Event Input Assignment 1 to 6 parameters
must not be set to enable/disable setting changes.
Description
) will light when setting is ON.
Description
Default
on
6 Parameters
6
6 - 5