Figure 6-26: Address Manager: Static Address - NETGEAR GSM712 Installation Manual

Main Menu> Advanced Menu> MAC Address Manager> Static Address
The Static Addresses Table, allows the administrator to specify Media Access Control (MAC) addresses for specific ports that will not be purged
from the bridge table by the aging function.
Add an entry
Type the MAC address under the first column, and hit Enter.
o
Enter the port number, which is associated with the MAC address.
o
If all the information is correct, the new entry will appear in the list below, which is in order by port ID. Otherwise, an error message will be displayed
and the cursor will return to the MAC Address field.
Remove an entry
Tab down to the entry and press Ctrl-X. ESC will return to the previous menu.
o

Figure 6-26: Address Manager: Static Address

Page 51 of 105