Sending A Fax Manually; Sending A Fax Manually After Using The Telephone - Oki MC160n User Manual

5
Specify the fax number of the recipient.
Refer to "Specifying a Recipient" on page 45.
To send a broadcast transmission to multiple destinations, refer to "Send-
ing a Fax to Multiple Recipients (Broadcast Transmission)" on page 49.
6
Press the Start key to begin scanning and sending the fax.
To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
theEnter key.
The transmission method returns to the default setting after the document
is scanned with a normal transmission or after transmission with a manual
transmission. It is useful if the most frequently used transmission method
is selected as the default. For details, refer to "FAX TX OPERATION" on
page 30.

Sending a Fax Manually

Sending a Fax Manually After Using the Telephone

If the machine is connected to a telephone and the same line is used for both
phoning and faxing, the document can simply be sent after talking with the recip-
ient over the phone.
This is useful, for example, if you want to tell the recipient that you are sending a
fax.
Manual transmission cannot be used together with duplex (double-sided)
document transmission.
1
Load the document into the ADF.
When sending a fax manually, load the document into the ADF. An error
will occur if the document is placed on the original glass.
For details on loading the document into the ADF, refer to "Sending a Fax
Using the ADF" on page 40.
2
If desired, adjust the image quality.
The document image quality can be adjusted. For details, refer to "Adjust-
ing the Image Quality" on page 44.
3
Pick up the handset and check that the dial tone can be heard.
55 Sending Faxes