Standard Features - Printronix SL5000 User Manual

Standard Features

•
Emulations:
•
Printronix LinePrinter Plus
Printronix P-Series printers, Epson FX-1050, Proprinter IIIXL, and
Serial Matrix Printers.
®
•
Printronix IGP /PGL
barcodes, graphics, lines, and boxes.
®
•
Printronix IGP /VGL. Emulates the QMS Code V™ Version II
programming language to produce on-line forms, bar codes, and
alphanumeric text generation in both normal and high resolution.
•
ZGL, TGL, IGL, STGL, DGL, MGL, and IEGL Interpreters: PPI/ZGL
®
(Zebra ), PPI/TGL (TEC
PPI/DGL (Datamax
interpreters are powerful integration tools that allow the SL5000r/
T5000r to function in virtually all legacy ZPL, TEC, IPL, SATO, DPL™,
®
MPCL II , and IER
modification to host data stream.
•
Thermal Transfer and Direct Thermal Printing: On all printers (except
DT models, which print only in thermal mode).
•
Standard Interfaces:
•
Serial: RS-232
•
USB 2.0 Universal Serial Bus
•
Parallel: Centronics
parallel
NOTE: The interface cable needed to connect the printer to the host device is
supplied by the user.
•
Bar Codes: Supports over 20 types of bar codes.
•
Download: Fonts, forms, and graphics to printer memory.
•
Resident Fonts: Letter Gothic Bold (#93779), Courier Bold (#93952),
CG Triumvirate Bold Condensed (#92250), OCR-A (#90993),
OCR-B (#91409), CG Triumverate (#92244), CG Triumverate Bold
(#92248), and CG Times (#92500).
•
High Resolution Printhead: For sharp graphics and text.
•
Label Taken Sensor: Detects removal of labels in Tear-Off mode (and in
Peel-Off mode when optional rewinder is installed).
•
Tear-Off Mode: Positions the label at the tear-off position and detects its
removal before printing the next label.
•
Tear-Off Strip Mode: Prints a specified number of labels and positions
the last label at the tear-off position.
•
32MB DRAM memory (fixed).
•
8MB Flash memory (SIMM).
®
(LP+). Provides direct compatibility with
®
. Provides printer system commands for text,
®
), PPI/IGL (Intermec
® ®
), PPI/MGL (Monarch
®
application environments without requiring
®
-compatible parallel, IEEE
Standard Features
® ®
), PPI/STGL (SATO ),
®
), and PPI/IEGL (IER )
®
1284 compliant
23