Table of Contents
Advertisement
Display Updating ON/OFF
You can select whether to display new measurement results on the screen by switching the
display updating function ON and OFF. Switch this function OFF to more quickly determine
whether the DUT is acceptable or not.
Switching display updating OFF gains 3ms + 6ms/point.
This updating function can be switched ON and OFF at any time.
Follow the procedure below.
1. Press
.
4
Display
5
2. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MEAS DISP ON off to switch the updating function ON and OFF.
4286A with Chip Handler
4-9
Advertisement
Table of Contents
