L4532A/ L4534A Rear Panel At A Glance; Channel Connections (Left Side Of Panel, 4-Channel Model); Control Connections (Center Of Panel); Communications Connections (Right Side Of Panel) - Agilent Technologies L4532A Series Service Manual

L4532A/ L4534A Rear Panel At A Glance

The photos below show the 4-channel model L4534A. T he 2-channel model L4532A will only have
two BNC connectors for C han 1 and C han 2 at left; all other connections are the same on both
models.

Channel Connections (left side of panel, 4-channel model)

1 BNC connectors for channel inputs
2 BNC connector for calibration source
connection
3 BNC connector for sync signal input
4 BNC connector for sync signal output
5 BNC connector for trigger signal
6 Service port
7 LAN reset access port
8 USB port
9 LAN port
10 Chassis ground terminal
11 AC power cable socket
Agilent L4532A/ 34A Service Guide

Control Connections (center of panel)

Communications Connections (right side of panel)

2
Introduction
19