Rear Wheel Assembly (Drum) - Yamaha FZ-16 Service Manual

NOTE:
Sprocket assembly of the rear wheel
manufacturer's brand out.
Tighten self-locking nuts in stages
and in a crisscross pattern

REAR WHEEL ASSEMBLY (DRUM)

1.
Lubricate:
Oil seal edges
Recommended lubricant
Based grease lithium soap
2.
Assembly:
Rear sprocket.
Refer to "CHECKING AND CHANGE
GEAR OF THE REAR WHEEL "
on page 4-14
3. Lubricate:
Wheel axle
Wheel bearings
Recommended lubricant
Based grease lithium soap
4.
Fit:
Clearance of the drive chain
Refer to "ADJUSTING THE CLEARANCE
CHAIN OF TRANSMISSION "on page
3-16
Chain slack
transmission
30-40 mm
5. Tighten:
Nut wheel axle
Nut wheel axle
90 Nm (8.0 m · kg, 58 ft · lb)
T.
R.
6. Fit:
Free pedal brake
Refer to "Brake Adjustment
DRUM "on page 3-14
Free pedal brake
15.0-20.0 mm
4-15
REAR WHEEL