Yamaha FZ-16 Service Manual page 119

Recommended Oil
Oil suspension
10W or equivalent
3.
Press:
•
Screw rod of the damper "1"
Screw rod
buffer
28 Nm (2.8 m · kg, 20 ft · lb)
T.
R.
NOTE:
While holding the damper rod with the
holder of the damper rod "2" and
T key "3", tighten the screw rod
buffer
4.
Assembly:
• Bushing outer tube "1"
• Washer "2"
(With the Seal assembly tool of
Front fork oil)
Seal assembly tool
of the front fork oil
YSST-875
5.
Assembly:
• Oil Seal "1"
New
Assembly tool oil seal
Front fork "2"
2
New
New
FRONT FORK
Seal assembly tool
of the front fork oil
YSST-875
CAUTION
Be sure to join the oil seal
with the number upwards.
NOTE:
•
Before installing the oil seal, lubricate
edges based grease lithium soap.
•
Lubricate the outer surface of inner tube
oil suspension.
•
Before installing the oil seal, cover the
top of the front fork leg with
a plastic bag to protect the oil seal
during assembly.
6.
Assembly:
• Oil Seal Clip "1"
NOTE:
Adjust the oil seal clip so that it fits
in the inner groove of the outer tube.
New
4-40
New
New