Check Transmission Chain - Yamaha FZ-16 Service Manual

CHAIN CHECK
TRANSMISSION
1.
Measure:
•
15 links the drive chain
Replace out of specification
chain.
Length limit of 15 links
191.5 mm
a.
Measure the length "a" between the inner faces
of the rollers and the length "b" between faces
outside of the rollers in a section 15
links of the chain of transmission as
is illustrated.
b.
Calculate the length "c" of section 15
links of the drive chain
using the following formula "c" = (length
"A" between the inner faces of the rollers +
Length "b" between the outer faces of the
rolls) / 2
NOTE:
•
When measuring the segment links 15
the chain of transmission, make sure the
This transmission chain taut.
•
Perform the measurement in two or three points
different each time
2.
Check:
•
Drive chain
Stiffness Limpiar and lubricate or replace.
CHAIN
3.
Clean:
•
Drive chain
a. Clean the chain with a cloth
clean.
b. Spray the cleaning chemical chain
transmission chain and thoroughly cleaned.
Chain cleaner recommended
for chains with O-ring
4. Check:
• roller chain transmission "1"
Damage / wear Replace chain
transmission.
• Side plates of the chain of transmission "2"
Damage / wear Replace chain
transmission.
Cracks Replace the drive chain.
5.
Lubricate:
•
Drive chain
Recommended lubricant
Proper chain lubricant
for chains with O-ring
Wipe off excess lubricant.
4-54