Yamaha FZ-16 Service Manual page 15

Tool name /
Tool No.
Adapter valve spring compressor
YSST-803 A
This tool is used to remove and install valve
and the valve spring using YSST 603.
Set pump pressure gauges
vacuum / pressure
This instrument is used to test and verify the vacuum
the air induction system.
Nut wrench direction
YSST-721
This tool is used to loosen and tighten the nut
direction.
Key in T
YSST-813
This tool is used to hold the plunger of the
front fork to loosen or tighten the bolt
Hex.
Assembly tool oil seal
Front fork
YSST-875
This tool helps install the oil seal
front fork.
Dynamic spark tester
This instrument is used to verify the efficiency of
the spark of the spark plug.
SPECIAL TOOLS
Illustration
1-8