INSPECTION OF CONNECTIONS
Check the cables, couplers and connectors
stains, oxidation, humidity, etc..
1.
Disconnect:
•Cable
•Coupler
•Connector
2.
Check
•Cable
•Coupler
•Connector
→
Moisture
Dry air-jet
→
Oxidation / patches
Connect and disconnect
several times.
3.
Check:
•All connections
→
Loose connection
Properly connect
NOTE:
If you crimp the pin "1" from the terminal, fold
upwards.
4.Connect:
•
Cable
•Coupler
•Connector
NOTE:
Make sure all connections are tight.
5.
Check:
•Continuity
(With the meter)
INSPECTION OF CONNECTIONS
NOTE:
• If there is no continuity, clean the terminals
• When checking the wire harness, perform steps
(1) to (3).
• As a quick fix, use a spray cleaner
contacts, is available in most
parts stores.
1-5