Carburetor Disassembly - Yamaha FZ-16 Service Manual

CARBURETOR DISASSEMBLY

1. Check:
•Carburetor body "1"
•Float chamber "2"
•Accommodation supplier "3"
Cracks / damage-Replace.
2. Check:
•Fuel passages
Clogged - Clean.
NOTE:
Wash the carburetor based solvent
oil.
Do not use a caustic solution for
carburetor cleaner.
Blow out all passages and jets with air
compressed.
3.Verificar:
•
Diaphragm Valve "1"
Cracks / damage - Replace
4.Verificar:
•
Body of the float chamber "1"
Dirt - Clean.
5.Verificar:
•
Rubber gasket of the chamber
float "1"
Cracks / damage / wear - Replace.
NOTE:
Always replace the gasket with a new one.
6.Verificar:
• Float "1"
Damage - Replace.
7.Verificar:
•
Needle valve "1"
•Seating the needle valve "2"
•O-ring "3"
Damage / obstruction / wear - Replace
the needle valve "1", the valve seat
needle "2" and O-ring "3" as a whole.
6-5
CARB