Yamaha FZ-16 Service Manual page 89

5.
Assembly:
velocidadUnidad sensor
NOTE:
Make sure the speed sensor and the
wheel hub are installed with the two
interlocking projections into the two slots
respectively.
6.
Assembly:
delanteraRueda
NOTE:
Make sure the slot "a" enters the tube
foreign and fits over the top "b" in the unit
Speed sensor.
7.
Press:
ruedaEje of
Wheel axle
60 Nm (6.0 m · kg, 43 ft · lb)
T.
R.
WARNING
Make sure the brake hose is
properly guided.
CAUTION
Before tightening the wheel axle nut,
push hard on the handlebar several
times and check if the front fork
bounces smoothly.
b
to
4-10
FRONT WHEEL