SHAFT INSPECTION OF CHANGES
1.
Check:
•
Axis changes
Curves / damage / wear Replace.
•
Changes shaft spring
Damage / wear Replace.
TOP LEVER INSPECTION
1.
Check:
•
Lever cap
Curves / damage Replace.
Replace harsh roller rotates the top of
the lever.
•
Stop lever spring
Damage / wear Replace.
ASSEMBLY SHAFT CHANGES
1.
Install:
•
Top of the lever "1"
•
Spring stop lever "2"
NOTE:
•
Hook the ends of the spring cap
the lowest position of the lever and the
protrusion of the cover "3".
•
Engage the top of the lever with the segment
drum changes.
3
2.
Install:
•
Axis of change "1"
NOTE:
Hook the end of the shaft spring
on the spring changes the top of the shaft
change "2".
2
1
2
1
5-48
AXIS OF CHANGES