Measurement And Adjustment Co - Yamaha FZ-16 Service Manual

b
Direction "a"
Increases engine idle
Direction "b"
Engine idle speed is reduced
8. Remove:
Digital Tachometer
9. Fit:
Cable free play Refer throttle
the "SET FREE GAME
THROTTLE CABLE "on page 3-6
Cable free play
3.0-5.0 mm throttle

MEASUREMENT AND ADJUSTMENT CO

1. Start the engine and let the calendar
equivalent to travel 4 kms.
2. Install:
Tachometer to the spark plug wire
1
to
3-5
3. Check:
Engine idle
If out of specification? Set.
Refer to "ADJUSTING THE IDLE
ENGINE "on page 3-4.
4. Insert:
Probe "2" meter CO
(Calibrated) for the exhaust pipe "3", using
the appropriate adapter "4"
Density of 'CO':
2.0 - 6.0%
Out of specification? Set.
5. Fit:
Adjusting the density of CO through the screw
Mixing
Turn the mixture tronillo "5" in or
out until the specified value
in the density of "CO"
Turn out
Density "CO" increases
Turn inward
Density "CO" is decreased
Idle adjustment according to the specifications
ENGINE
5