Removing The Rear Wheel (Drum); Checking The Rear Wheel Drive Hub; Checking The Rear Wheel - Yamaha SR400 2014 Service Manual

EAS22060

REMOVING THE REAR WHEEL (DRUM)

1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
TIP
Place the vehicle on a suitable stand so that the
rear wheel is elevated.
2. Remove:
• Brake rod "1"
• Tension bar "2"
1
3. Loosen:
• Locknut "1"
• Adjusting bolt "2"
2
1
4. Remove:
• Wheel axle nut
5. Remove:
• Wheel axle
• Spacer
• Chain puller (left/right)
• Drive chain "1"
• Rear wheel
TIP
Push the rear wheel forward and remove the
drive chain from the rear wheel sprocket.
6. Remove:
• Brake shoe plate
EAS22110

CHECKING THE REAR WHEEL DRIVE HUB

1. Check:
• Rear wheel drive hub "1"
Cracks/damage  Replace.
• Rear wheel drive hub damper "2"
Damage/wear  Replace.
2
EAS22101

CHECKING THE REAR WHEEL

1. Check:
• Wheel axle
• Rear wheel
• Wheel bearing
• Oil seal
Refer to "CHECKING THE FRONT WHEEL"
on page 4-7.
2. Check:
• Tire
• Rear wheel
Damage/wear  Replace.
Refer to "CHECKING THE TIRES" on page
3-16 and "CHECKING THE WHEELS" on
page 3-15.
3. Check:
• Spoke
Refer to "CHECKING AND TIGHTENING
THE SPOKES" on page 3-15.
4. Measure:
• Radial wheel runout
• Lateral wheel runout
4-14
REAR WHEEL
2
1
1