Rear Wheel Assembly - Yamaha XVS6501997 Service Manual

REAR WHEEL AND REAR BRAKE

REAR WHEEL ASSEMBLY

*****************************************************
Installation steps:
D Install the new bearings by reversing the re-
NOTE:
Use a socket 1 that matches the diameter of
the outer bearing race and the oil seal.
Do not contact the bearing center race 2 or
balls 3 . Contact should be made only with
the outer race 4 .
*****************************************************
6-27
3. Measure:
S Brake drum inside diameter a
Out of specification ! Replace the wheel.
Brake drum inside diameter:
200 mm
Wear limit:
201 mm
4. Inspect:
S Brake drum inner surface
Oil/scratches ! Repair.
Use a rag soaked in lacquer
Oil
thinner or solvent.
Use an emery cloth (polish
Scratches
lightly and evenly)
5. Inspect:
S Camshaft face
Wear ! Replace.
1. Install:
S Spacer
S Collar
S Bearings
moval steps.
CAUTION:
CHAS